Procedure For Vehicles That Have Not Yet Been Handed Over To Customers (Prior To Sales Check)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Conditions
- Vehicle, which has not yet been handed over to the customer, is raised on the lifting platform.
- Vehicle, which has not yet been handed over to the customer, is in transport mode.
- Air suspension system is empty.
- Fill the air suspension system as described below under "Bleeding and filling one axle" and "Bleeding and filling the entire air suspension system and pressure accumulator".
Following vehicle handover, transport mode can be disabled using the Porsche System Tester.
- Vehicle handover: Porsche System Tester >>Control unit overview >>F7 - Additional menu >>Vehicle handover<<.
- Transport mode: Porsche System Tester >>Control unit overview >>Levelling system/PASM >>Actual values/input signals >>Transport mode<<.