Bleeding And Filling The Entire Air Suspension System And Pressure Accumulator
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
Only nitrogen 5.0 may be used for filling the air suspension system. Available by requesting part number: 999.917.303.01.
- Use a compressed gas bottle with a corresponding pressure reducer unit and pressure gauge .
- Fill the air suspension system to at least → Pressure: +10 bar+1 bar .
- Fill the air suspension system to max . → Pressure: +17 bar
- Wheels must be suspended freely .
- Switch on ignition .
- Pressure reducer WE 1409 or Nitrogen filler set VAS 6629 WE 1374 must be used .
- Adapter T10157 and connecting line 9825/1 must be used .
- The air suspension system is filled using the pressure accumulator .
- Observe specified tightening torques . → 4X00IN TIGHTENING TORQUES FOR LEVELLING SYSTEM/PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)