WM 430115 Calibrating The Levelling System (Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)): Checking: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Calibration must be performed if one or more of the following situations apply:

Control unit was replaced.
Level sensors were replaced.

The level sensors are calibrated by determining a correction value (corresponding to the actual height of the vehicle) and storing it permanently in the control unit. Select Control unit overview >>Levelling system/PASM<< >>Maintenance/repairs<< Height sensor system calibration on the Porsche System Tester.