WM 430115 Calibrating The Levelling System (Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)): Checking: Instructions
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
The nominal values for the nominal heights of the level sensors are stored in the control unit. The actual values of the respective axle heights, front left, front right, rear left, rear right, have to be measured manually and then entered using the Porsche System Tester. The actual values must be measured on the front and rear axle, both on the left and right. 430115 CALIBRATION - section on "Information" - Height measurement point on rear axle; - Height measurement point on front axle
See also: → 430115 CALIBRATION - section on "Information" - Conditions for carrying out calibration