Reading Out Transfer Gear Wear Integrator
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
The transmission wear integrator oil must be checked during every intermediate maintenance/maintenance.
- Start PIWIS Tester II 9818 and follow the instructions on the Tester.
- Select the vehicle type and start the PIDT.
- Select the All-wheel menu.
- Select the Actual values, input signals menu.
- Select the T_wear integrators menu. Press [F12] to continue.
- Read out the value for V40 transmission wear integrator - oil
.
If this value is greater than 145 kWh , the oil in the transfer gear must be changed → Changing oil for transfer gear. If the value is lower, no further action is required.
- If the oil in the transfer gear has been changed, the value must be deleted and reset to zero by pressing [F8].