LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (47 Brakes- Brake Hydraulic System, Regulator, Booster -- 92A Cayenne) >> WM 473919 Removing And Installing Front Brake CALLIPER (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work >> Notes

Subsequent Work: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bleed the brake system.

    → 470107 BLEEDING THE BRAKE SYSTEM 

  2. Position disc brake pads by operating the brake several times.
  3. If new brake pads are fitted, read the information under "Removing and installing disc brake pads" → Installing Front Disc Brake Pads
  4. Fit wheel. Use assembly aids (assembly pins) -1-  . → Installing Wheel .
    Fig 1: Identifying Assembly Aids (Threaded Bolts For Fitting Wheel)
    G09937538Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals