LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (44 - Wheels, Tires, Suspension Alignment -- 92A Cayenne) >> WM 4495IN Additional Information On Suspension Alignment (Control Value) (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S Hybrid, Cayenne S E, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Information >> Additional Information On Suspension Alignment

Additional Information On Suspension Alignment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Wheel alignment should not be performed on vehicles with a mileage of between 0 and 200 km (124 miles). The settling behavior of the Cayenne is only complete after this.

Based on this settling behavior, a control value for track adjustment on the front axle is introduced in addition to the usual adjustment values during suspension alignment. The upper tolerance limit of the control value is higher than the upper tolerance limit of the adjustment value. Track adjustment is only performed if the control value on the vehicle is above or below the tolerance limit.

If suspension alignment must be carried out on a vehicle within the first 200 km (124 miles), e.g. following repairs arising from an accident, the adjustment values must be used as a basis for tracking. The tracking should be adjusted to the upper tolerance limit on the front and rear axle.

The control value, for the front axle, is listed along with the adjustment values. → 4495TW ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENT