LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (96 - Lights, Lamps, Switches, Interior -- 92A Cayenne) >> WM 964755 Replacing Light Bulb For Reading Light (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Light Bulb For Reading Light

Removing Light Bulb For Reading Light

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Incorrect handling of bulbs
  • Risk of damage to bulbs and the bulb housing

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

Information 

  1. Turn socket -1-  90° in direction of arrow and pull it out of the reading light -2-  .
  2. Remove bulb -3-  from its socket.
    Fig 1: Removing Light Bulb For Reading Light
    G09941981Courtesy of PORSCHE CARS NORTH AMERICA, INC.