WM 2X00IN Important Information On Adapting The DME Control Unit (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Hybrid, Cayenne (3.0)): Information

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

Adaptation values are deleted or stored in EEPROM when ignition is switched off after control unit run-on has ended.
(Run-on period: 1 minute when engine is cold; up to 45 minutes when engine is hot)

Information
The following adaptations will be deleted automatically when you erase the fault memory (see information under 1)):
- Mixture adaptation
- Lambda adaptation
- Camshaft adaptation
- Knock adaptation
- Map-controlled thermostat adaptation