Torque Loss
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Necessary after:
- Re-programming DME control unit
- Replacing DME control unit
- Re-programming PDK control unit
Necessary before:
- Re-calibrating PDK
How?
Engine idling
- Preconditions:
- 1.1. Engine at operating temperature
- Engine idling for 3 minutes without activating loads, press accelerator pedal once after approx. 1.5 minutes during this time
- Engine idling for 3 minutes with air conditioning switched on, press accelerator pedal once after approx. 1.5 minutes during this time
- Engine idling for 3 minutes with air conditioning switched on and transmission range engaged, press accelerator pedal once after approx. 1.5 minutes during this time
- Switch off ignition (see also INFORMATION )