LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (46 Brakes - Brake Mechanism -- 92A Cayenne) >> WM 465119 Removing And Installing Front PCCB Brake Disc >> Information >> Explanation Of Two-Part Brake Disc

Explanation Of Two-Part Brake Disc

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. The PCCB brake discs consist of two parts on the front and rear axles. The brake disc -1-  is screwed to the brake-disc chamber -2-  with screws (M6) -3-  .
    Fig 1: Identifying Two-Part Brake Disc
    G09937402Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Fig 2: Identifying Two-Part Brake Disc
    G09937403Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Only the complete brake disc is available as a spare part (disc + brake-disc chamber)!
  3. Do not separate the brake-disc chamber -2-  and brake disc -1-  . In addition, the screws -3-  must not be turned and should not need to be turned. The screws are prevented from turning by compression in the bushing.
  4. It is essential that the Tightening Torque of the screws is not changed (do not turn the screws) as this can have a negative effect on the sound behavior.
    1 Brake disc
    2 Brake-disc chamber
    3 Screw
scientia non olet · About LEMON Manuals