Installing Hydraulic Pump - Cayenne V6
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Only use Pentosin CHF 202 to fill the hydraulic system.
- Check the hydraulic fluid level.
- Replace sealing rings.
- Use correct tightening torques → Cayenne V6 3.6 DFI
- Use correct tightening torques → 4X00IN TIGHTENING TORQUES FOR STEERING .
- If the hydraulic pump is replaced, other components must also be replaced and the steering system must be flushed → 489729 FLUSHING THE STEERING SYSTEM
- Fit the hydraulic pump.
- Fit pulley on the hydraulic pump and screw in the screws.
- Fit drive belt in correct position and tension → 137801 CHECKING DRIVE BELT .
- Tighten the pulley on the hydraulic pump.
- Fit both hydraulic lines.