Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 1: Threaded connection securing differential to suspension subframe | M12 x 1.5 x 90 thread (always replace screws and lock nuts after removal) | Tightening torque | 90 Nm (67 ftlb.) | +90° | |
| No. 1: Threaded connection securing steering gear to suspension subframe | M12 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening torque | 90 Nm (67 ftlb.) | +90° | |
| No. 2: Threaded connection securing tie rod to pivot bearing | M14 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening torque | 90 Nm (67 ftlb.) | ||
| No. 4: Threaded connection for heat shield | M6 x 16 thread | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| No. 6: Expansion hose to steering gear | a/f 17 thread (a/f = wrench size 17) | Tightening torque | 32 Nm (24 ftlb.) | +/-4 Nm (+/- 3 ftlb.) | |
| No. 7: Return line to steering gear | a/f 17 thread (a/f = wrench size 17) | Tightening torque | 32 Nm (24 ftlb.) | +/-4 Nm (+/- 3 ftlb.) | |
| No. 8: Heat shield to steering gear | M6 x 16 thread | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| No. 6: Threaded connection securing universal joint to steering gear | M8 x 30 thread (only use screw once) | Tightening torque | 20 Nm (15 ftlb.) | +90° |