Removing Sealing Bellows On The Steering Column: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- To remove and install the sealing bellows, the steering column must be removed.
- When the intermediate steering shaft has been separated, make sure that everything remains extremely clean. The grease on the individual parts must not be wiped off. If these individual parts are stored for a long period of time, they must be protected from dust and dirt.
- Mark the upper and lower part of the steering column (sliding piece with universal joint for steering column). This ensures that both parts of the steering column are re-assembled at the correct position.
Information
- The pictures shown in this document may differ from the original.