LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (48 - Steering -- 92A Cayenne) >> WM 482919 Removing And Installing Switch For Height And Fore-And-Aft Adjustment (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Switch For Height And Fore-And-Aft Adjustment

Removing Switch For Height And Fore-And-Aft Adjustment

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The switch for height and fore-and-aft adjustment is located on the bottom of the steering column casing.

  1. Insert a suitable flat screwdriver into the slit -1-  .
    Fig 1: Inserting Suitable Flat Screwdriver Into Slit
    G09937696Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press the clip back using the flat screwdriver.
  3. Pull the switch -2-  down out of the way.
  4. Unplug electric plug connection -1-  .
    Fig 2: Pulling Off Connector
    G09937697Courtesy of PORSCHE CARS NORTH AMERICA, INC.