LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (48 - Steering -- 92A Cayenne) >> WM 481519 Removing And Installing Steering Column (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Subsequent Work >> Subsequent Work For Removing And Installing Steering Column

Subsequent Work For Removing And Installing Steering Column

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

If installed: 

  1. Remove knee airbag. → Installing Knee Airbag On Driver's Side
  2. Install trim panel under dashboard on the driver's side. → 701919 REMOVING AND INSTALLING TRIM PANEL UNDER DASHBOARD
  3. Install steering-column switch. → 945019 REMOVING AND INSTALLING STEERING-COLUMN SWITCH

    Turbo engine: 

  4. Install primary catalytic converter. → Installing Primary Catalytic Converter

    Diesel engine: 

  5. Secure rear part of front left wheel cover. → 661919 REMOVING AND INSTALLING FRONT WHEEL COVER
scientia non olet · About LEMON Manuals