Technical Values: Overview
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Threaded connection securing brake calliper to front-axle 18-inch wheel carrier | M14 x 1.5 x 115 thread (always replace screws and lock nuts after removal) | Tightening torque | 140 Nm (104 ftlb.) | ||
| Threaded connection securing brake calliper to front-axle 19-inch wheel carrier and PCCB | M14 x 1.5 x 135 thread (always replace screws and lock nuts after removal) | Tightening torque | 140 Nm (104 ftlb.) | ||
| Connecting line to brake calliper | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | |
| Threaded connection securing brake calliper to rear-axle wheel carrier | M12 x 1.5 x 115 thread (always replace screws and lock nuts after removal) | Tightening torque | 85 Nm (63 ftlb.) | ||
| Bleeder screw on brake calliper | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/-2 Nm (+/- 1.5 ftlb.) | |
| Brake pressure pipe to brake calliper | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | |
| Cap screws for brake lines | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | |
| Mounting for intermediate piece | M6 x 14 thread | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Vacuum pump (electric) | Tightening torque | 10 Nm (7.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | ||
| Vacuum pump (mechanical) | M6 x 25 thread | Tightening torque | 10 Nm (7.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | |
| No. 1: Brake master cylinder to brake booster | M8 thread | Tightening torque | 23 Nm (17 ftlb.) | +/-2 Nm (+/- 1.5 ftlb.) | |
| No. 2: Brake booster to pedals | M8 thread | Tightening torque | 26 Nm (19 ftlb.) | +/-3 Nm (+/- 2 ftlb.) | |
| Brake pressure pipe to brake master cylinder | Tightening torque | 18 Nm (13 ftlb.) | +/-2 Nm (+/- 1.5 ftlb.) | ||
| Brake pressure pipe to brake hose, distributor, brake calliper | M10/M12 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) |