Technical Values: Overview
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 1: Holder to hydraulic unit | M6 x 10 thread | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Fastening screws securing hydraulic unit holder to body | Tightening torque | 5 Nm (3.5 ftlb.) | |||
| No. 1, 2, 3, 6: Brake pressure pipe to hydraulic unit | M10/M12 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | |
| No. 4, 5: Brake pressure pipe to hydraulic unit | M12 thread | Tightening torque | 18 Nm (13 ftlb.) | +/-2 Nm (+/- 1.5 ftlb.) | |
| Cap screws for brake lines | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/-1 Nm (+/- 0.5 ftlb.) | |
| No. 1: Combination sensor | M6 thread (always replace screws and lock nuts after removal) | Tightening torque | 8 Nm (6 ftlb.) | ||
| Speed sensor to front and rear axles | M6 x 16 thread | Tightening torque | 8 Nm (6 ftlb.) |