LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (70 - Linings, Insulation -- 92A Cayenne) >> WM 706819 Removing And Installing C-Pillar Trim Panel (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing C-Pillar Trim

Installing C-Pillar Trim

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. The C-pillar trim panel is installed in reverse order to removal.

    Information 

    Always replace the fastening screws on the three-point seat belt. The micro-self-locking screws must not be treated (e.g. greased) or loosened and then screwed on again.

  2. Tighten fastening screw for the seat belt to Tightening torque 50 Nm (37 ftlb.)  .

    Tools: Socket-wrench set, 39-piece WE 1640 

scientia non olet · About LEMON Manuals