LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (70 - Linings, Insulation -- 92A Cayenne) >> WM 706319 Removing And Installing Handle (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Handle

Removing Handle

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unclip cover -1-  using a plastic wedge and remove it by pulling it inwards.
    Fig 1: Unclipping Large Cover
    G09940731Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unclip cover -2-  using a plastic wedge and remove it by pulling it inwards.
    Fig 2: Unclipping Small Cover
    G09940732Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unscrew and remove fastening screws -3-  for handle -4-  .
    Fig 3: Removing Handle
    G09940733Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Remove handle -4-  by pulling it inwards.