LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (66 - Exterior Equipment -- 92A Cayenne) >> WM 664819 Removing And Installing Trim Panel For Rear Lid (Handle Strip) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing Trim Panel For Rear Lid (Handle Strip)

Installing Trim Panel For Rear Lid (Handle Strip)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace bonding on handle strip if necessary.
  2. The handle strip is installed in reverse order to removal.
  3. Tighten the fastening nuts for the handle strip to → Tightening torque: 6 Nm (4.5 ftlb)  .
scientia non olet · About LEMON Manuals