LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (0X - Complete Vehicle - General -- 92A Cayenne) >> WM 0X03IN Running Gear Maintenance: Axle Joints/Drive Shafts/Tie Rod Joints (Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Preliminary Work >> Tie Rod Joints: Checking Dust Boots

Tie Rod Joints: Checking Dust Boots

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle → 4X00IN LIFTING THE VEHICLE

    Information 

    • The rubber dust boots and bellows on the steering gear and on the tie rods can be damaged by external influences, e.g. stone impact, or during assembly work. 
    • If a rubber dust boot leaks, the joint or tie rod must be replaced, because any dirt or moisture that seeps in will destroy the joint. 
  2. Check dust boots.