| Union nut on connecting line for cylinder 1-3 and 4-6 |
M14 x 1.5 - coat thread and cone with OKS 1710 |
Tightening torque |
20 Nm (15 ftlb.) |
|
|
| Union nut securing high-pressure pump line to connecting line |
M14 x 1.5 - coat thread and cone with OKS 1710 |
Tightening torque |
20 Nm (15 ftlb.) |
|
|
| Fuel collection pipes to cylinder head |
External Torx screw, M6 x 30 |
Tightening torque |
13 Nm (9.5 ftlb.) |
|
|
| Holder securing high-pressure line and low-pressure line to cylinder head |
External Torx screw, M6 x 16 |
Tightening torque |
13 Nm (9.5 ftlb.) |
|
|
| Holder securing connecting line to cylinder head |
External Torx screw, M6 x 16 |
Tightening torque |
13 Nm (9.5 ftlb.) |
|
|
| Holding clamp securing high-pressure line to sheetmetal bracket |
External Torx screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Holding clamp securing connecting line to sheetmetal bracket |
External Torx screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| High-pressure sensor to fuel collection pipe for cylinder 4-6 |
M10 x 1 |
Tightening torque |
22 Nm (16 ftlb.) |
+/-2 Nm (+/- 1.5 ftlb.) |
|