Technical Values: Notes

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Fastening screws for instrument cluster		Tightening torque	3.2 Nm (2 ftlb.)
Fastening nut for horn		Tightening torque	10 Nm (7.5 ftlb.)
Fastening screws for stopwatch		Tightening torque	1.7 Nm (1.5 ftlb)
Fastening screw securing front apron to body, bottom	Item 2	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Bottom of front apron (shown on the 991)
Fastening nut securing antenna amplifier to A-pillar		Tightening torque	6 Nm (4.5 ftlb.)
Threaded joint for display and control panel		Tightening torque	5.6 Nm (4 ftlb.)
"CD player" radio		Tightening torque	5.6 Nm (4 ftlb.)
Threaded connection for mid-range loudspeaker in door sub-frame		Tightening torque	3 Nm (2 ftlb.)
Threaded connection for woofer in door sub-frame		Tightening torque	3 Nm (2 ftlb.)
Fastening screw securing tweeter to dashboard		Tightening torque	2.5 Nm (2 ftlb.)
Fastening screw securing center speaker to dashboard		Tightening torque	3.2 Nm (2 ftlb.)
Fastening screw securing subwoofer to dashboard bracket		Tightening torque	3.5 Nm (2.5 ftlb.)
Threaded connection for rear speaker		Tightening torque	2 Nm (1.5 ftlb.)
Fastening nut for loudspeaker amplifier		Tightening torque	6 Nm (4.5 ftlb.)
Fastening screw for SDARS antenna		Tightening torque	2 Nm (1.5 ftlb.)	+0.5 Nm (+0.5 ftlb.)
Fastening nut securing TV tuner to body		Tightening torque	2.5 Nm (2 ftlb.)
Fastening screw for windscreen-washer reservoir		Tightening torque	10 Nm (7.5 ftlb.)
Fastening nut on wiper arm		Tightening torque	25 Nm (19 ftlb.)
Wiper arm on passenger's side	2	Adjustment value	10 mm
Wiper arm on driver's side	1	Adjustment value	10 mm
Adjusting wiper arm
Wiper arm for rear window washer to wiper motor		Tightening torque	19 Nm (14 ftlb.)
Fastening screw securing wiper linkage to body	1	Tightening torque	23 Nm (17 ftlb.)
Fastening screw securing wiper linkage to body	2. 3	Tightening torque	11 Nm (8 ftlb.)
Threaded connection for wiper linkage
Fastening screw securing wiper motor to body	-2-	Tightening torque	3 Nm (2 ftlb.)
Fastening nut securing wiper motor to body	-3-	Tightening torque	8 Nm (6 ftlb.)
Installing wiper motor
Fastening nuts securing headlight mounting to body		Tightening torque	8 Nm (6 ftlb.)
Gap dimension -x- brake light switch	Gap between sensor and counter plate	Adjustment value	1.5 mm	+/-0.5 mm
Clamping screw for steering-column switch		Tightening torque	6 Nm (4.5 ftlb.)
Fastening screw for tail light		Tightening torque	2.0 Nm (1.5 ftlb.)	+/-0.2 Nm (+/- 0.1 ftlb.)
Removing tail light
Threaded joint for angle sensor on holder		Tightening torque	3.4 Nm (2.5 ftlb.)
Threaded joint for connecting link (angle sensor) on wishbone		Tightening torque	4.5 Nm (3.5 ftlb.)
Additional brake light fastening nuts on body		Tightening torque	3.2 Nm
Unscrew additional brake light fastening nuts
Fastening screw for Kessy antenna in center console		Tightening torque	3 Nm (2 ftlb.)
Threaded joint for alarm siren holder on compressor holder		Tightening torque	2.8 Nm (2 ftlb.)
Threaded joint for alarm horn holder on spring strut dome		Tightening torque	9.7 Nm (7.5 ftlb.)	+10 %	-20 %
Ground points on longitudinal member in front luggage compartment		Tightening torque	8.5 Nm (6 ftlb.)
Main wire harness in luggage compartment, inner right
Main wire harness in luggage compartment, inner left
Fastening nut securing feed-through element in firewall	1	Tightening torque	5.5 Nm (4 ftlb.)
Feed-through element in firewall
Fastening nut securing cable shoe on B+ line for battery to power distributor	M8	Tightening torque	12 Nm (9 ftlb.)
Fastening nut securing fuse box to positive terminal	1	Tightening torque	9.7 Nm (7.5 ftlb.)
Loosening fuse box
Battery console to body	2	Tightening torque	23 Nm (17 ftlb.)
Removing and installing battery console
Fastening screw securing holder for wire harness in engine compartment to body	1	Tightening torque	9.7 Nm (7.5 ftlb.)
Securing holder
Fastening nut securing ground strap to body	M6	Tightening torque	8.5 Nm (6.5 ftlb.)
Ground straps for main wire harness, left
Ground straps for main wire harness, right
Fastening nut securing fuse box at the right to body	M6	Tightening torque	9.7 Nm (7.5 ftlb.)
Fastening nut securing power supply line to power distributor	M6	Tightening torque	12 Nm (9 ftlb.)
Fastening nut securing fuse box at the left to body	M6	Tightening torque	9.7 Nm (7.5 ftlb.)
Fastening nuts securing bracket for control unit for front-end electronics to body	M6	Tightening torque	3.5 Nm (2.5 ftlb.)
Fastening screw securing front ground strap to roof	M5	Tightening torque	2.5 Nm (2 ftlb.)
Cable duct to cylinder head	M8	Tightening torque	23 Nm (17 ftlb.)
Electric line for term. 50 to starter	M6	Tightening torque	6.5 Nm (5 ftlb.)
Ground straps to valve cover	M6	Tightening torque	10 Nm (7.5 ftlb.)
Threaded connection for mid-range loudspeaker		Tightening torque	3 Nm (2 ftlb.)
Ground strap to body		Tightening torque	15 Nm (11 ftlb.)
Fastening screw securing ground strap to engine, M8		Tightening torque	23 Nm (17 ftlb.)
Fastening screw securing ground strap to body, M8		Tightening torque	23 Nm (17 ftlb.)
Fastening nuts (M8) for battery lines in power distributor		Tightening torque	12 Nm (9 ftlb.)	+/-1 Nm (+/- 0.5 ftlb.)
Fastening nuts (M5) for fuse element in power distributor		Tightening torque	5 Nm (3.5 ftlb.)	+/-1 Nm (+/- 0.5 ftlb.)
Fastening nuts (M8) for cutoff relay		Tightening torque	12 Nm (9 ftlb.)	+/-1 Nm (+/- 0.5 ftlb.)
Fastening nut for cover on connection point for rear ABS	1	Tightening torque	2.5 Nm (2 ftlb.)
Securing cover
Threaded joint for alarm siren holder on compressor holder		Tightening torque	2.8 Nm (2 ftlb.)
Threaded joint for compressor holder		Tightening torque	2.8 Nm (2 ftlb.)
Threaded joint for terminal clamp to battery		Tightening torque	6.5 Nm (5 ftlb.)	+/-0.5 Nm (+/- 0.5 ftlb.)
Threaded joint securing retaining bar to body		Tightening torque	23 Nm (17 ftlb.)
Battery mount		Tightening torque	23 Nm (17 ftlb.)
Fastening screws securing DME control unit to bracket	M6	Tightening torque	9.7 Nm (7.5 ftlb.)
Fastening screws securing DME control unit bracket to body	M6	Tightening torque	9.7 Nm (7.5 ftlb.)
Fastening nuts securing DME control unit bracket to body		Tightening torque	9.7 Nm (7.5 ftlb.)
Fastening nut securing ground strap for DME control unit to body		Tightening torque	8 Nm (6 ftlb.)
Fastening nut securing PASM control unit to body	M6	Tightening torque	4.5 Nm (3 ftlb.)
Fastening nuts securing parking brake control unit to body	M6	Tightening torque	4.5 Nm (3 ftlb.)
Fastening nut securing relay carrier in right luggage compartment to body		Tightening torque	9.7 Nm (7.5 ftlb.)