LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> 70 - Linings, Insulation -- (981) BOXSTER/CAYMAN >> WM 708719 Removing And Installing Trim Panel For Rear Lid (Except BOXSTER, BOXSTER S, BOXSTER GTS, BOXSTER SPYDER) >> Removing Trim Panel For Rear Lid

Removing Trim Panel For Rear Lid

  1. Remove finger plate from trim panel for rear lid.
    1. 1.1. Lever out the catches -arrows A-  in the finger plate -1-  using a screwdriver.
    2. 1.2. Remove finger plate -1-  (-arrow B-  ).
      Fig 1: Removing Finger Plate
      G10027686Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew and remove fastening screws -2-  on trim panel for rear lid -1-  .
    Fig 2: Identifying Rear Lid Trim Panel And Screws
    G10027687Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    To reduce the unclipping forces and thereby the risk of damage during removal, the removal steps must be carried out at the accessible connection points using a suitable tool.

  3. Unclip trim panel for rear lid -1-  all the way around -arrows-  using a plastic wedge.
    1. 3.1. Remove trim panel for rear lid -1-  .
      Fig 3: Removing Trim Panel From Rear Lid
      G10027688Courtesy of PORSCHE CARS NORTH AMERICA, INC.