Technical Values

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Retaining bracket to retaining frame	M6 x 20	Tightening torque	13 Nm (9.5 ftlb.)
Retaining bracket and passenger's airbag unit to retaining frame	M6 x 30	Tightening torque	10 Nm (7.5 ftlb.)
Retaining bracket to dashboard	M5 x 20	Tightening torque	3 Nm (2 ftlb.)
Retaining bracket to passenger's airbag unit	M5 x 20	Tightening torque	3 Nm (2 ftlb.)
Head airbag to door	M6 x 25	Tightening torque	10 Nm (7.5 ftlb.)
Mounting for head airbag
Fastening nut for front airbag sensor		Tightening torque	9 Nm (6.5 ftlb.)
Fastening nut for side airbag sensor		Tightening torque	9 Nm (6.5 ftlb.)
Triggering unit to body	Fastening nut	Tightening torque	10 Nm (7.5 ftlb.)
Fastening screws for knee airbag on passenger's side	Torx screw	Tightening torque	13 Nm (9.5 ftlb.)
Fastening screws for knee airbag on driver's side	Torx screw	Tightening torque	13 Nm (9.5 ftlb.)
Front side airbag to seat frame		Tightening torque	7.5 Nm (5.5 ftlb.)
Sun visor bracket, inner		Tightening torque	5.5 Nm (4 ftlb.)	+/-0.5 Nm (+/- 0.5 ftlb.)
Removing inner sun visor bracket
Sun visor bracket, outer		Tightening torque	9.6 Nm (7.5 ftlb.)	+/-0.5 Nm (+/- 0.5 ftlb.)
Removing outer sun visor bracket
Fastening screws for glove compartment, top		Tightening torque	3.2 Nm (2 ftlb.)
Securing glove compartment at the top
Fastening screws for glove compartment, bottom		Tightening torque	13 Nm (9.5 ftlb.)
Securing glove compartment at the bottom
Fastening screw for glove compartment, sides		Tightening torque	3.2 Nm (2 ftlb.)
Securing glove compartment at the sides
Fastening screw securing center console at the top to tunnel		Tightening torque	9.7 Nm (7.5 ftlb.)	+/-0.9 Nm (+/- 0.5 ftlb.)
Loosening center console at the top
Fastening screw for upper part of center console		Tightening torque	3.2 Nm (2 ftlb.)	-0.3 Nm (- 0.2 ftlb.)
Fastening screw securing center console at the front		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.3 Nm (+/- 0.2 ftlb.)
Loosening center console at the front
Fastening screw securing footwell outlet vent trim		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.3 Nm (+/- 0.2 ftlb.)
Fastening screws securing tunnel support to body/dashboard bracket		Tightening torque	23 Nm (17 ftlb.)
Mounting for tunnel support at the top
Fastening screw securing tunnel support at the side to body		Tightening torque	23 Nm (17 ftlb.)
Mounting for tunnel support at the lower side
Fastening screws securing upper part of lid to lower part of lid	Item 2	Tightening torque	3.2 Nm (2 ftlb.)
Installing upper part of lid
Fastening screw for storage compartment in center console		Tightening torque	9.7 Nm (7.5 ftlb.)
Installing storage compartment
Fastening screws securing upper part of tunnel support to dashboard bracket		Tightening torque	12 Nm (9 ftlb.)
Securing upper part of tunnel support
Fastening screw securing fire extinguisher holder to seat frame		Tightening torque	10 Nm (7.5 ftlb.)
Fastening screw securing tray to fire extinguisher holder		Tightening torque	10 Nm (7.5 ftlb.)
Fastening nut for air intake frame		Tightening torque	5 Nm 3.5 ftlb.)	0.5 Nm (0.4 ftlb.)	0.75 Nm (0.5 ftlb.)
Fastening screw securing bumper to bodyshell		Tightening torque	23 Nm (17 ftlb.)	+/-2 Nm (+/- 1.5 ftlb.)
Removing front bumper
Fastening screw for front spoiler		Tightening torque	2.7 Nm (2 ftlb.)	+/-0.2 Nm (+/- 0.1 ftlb.)
Loosening front spoiler
Fastening screw securing front apron to body, top		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Loosening front apron at the top
Fastening screw securing front apron to body, side		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Loosening front apron at the sides
Fastening screw securing front apron to body, bottom		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Loosening front apron at the bottom
Fastening screws for side retaining strip		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Removing retaining strip
Fastening nut securing front retaining strip to body		Tightening torque	10 Nm (7.5 ftlb.)
Removing front retaining strip
Fastening nuts for pedestrian protection		Tightening torque	23 Nm (17 ftlb.)	+/-2 Nm (+/- 1.5 ftlb.)
Removing pedestrian protection
Fastenings screws for bumper reinforcement	Item 1	Tightening torque	23 Nm (17 ftlb.)	+/-2 Nm (+/- 1.5 ftlb.)
Removing bumper
Fastening screws for rear apron, bottom		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Mounting from below
Fastening screws in rear spoiler area		Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Mounting under rear spoiler
Fastening screws in tail light area		Tightening torque	7 Nm (5 ftlb.)	+/-0.7 Nm (+/- 0.5 ftlb.)
Mounting in tail light area
Fastening screws for retaining strip		Tightening torque	7 Nm (5 ftlb.)	+0.7 Nm (+0.5 ftlb.)	-1 Nm (-0.5 ftlb.)
Installing rear retaining strip
Fastening nuts for spoiler drive		Tightening torque	9.7 Nm (7.5 ftlb.)
Loosening spoiler drive
Fastening screws for upper part of rear spoiler		Tightening torque	2.2 Nm (1.5 ftlb.)
Removing upper part of rear spoiler
Fastening nut for lower part of rear spoiler		Tightening torque	15 Nm (11 ftlb.)	+/-1.5 Nm (+/- 1 ftlb.)
Removing lower part of rear spoiler
Fastening screws for rear wall cover		Tightening torque	9.7 Nm (7.5 ftlb.)
Removing rear wall cover
Fastening screw for door window glass	With special tool	Tightening torque	6 Nm	+/-0.9 Nm
Securing door window glass
Fastening screw for door window glass	Directly at the screw	Tightening torque	12 Nm	+/-1.8 Nm
Securing door window glass
Power regulator motor to window lifter		Tightening torque	4.7 Nm	+/-0.5 Nm
Removing power regulator motor
Fastening nut for window lifter		Tightening torque	9.7 Nm	+/-0.9 Nm
Screwing off fastening nuts
Closing depth of front door window	Z1	Adjustment value	3.5 mm	+/-1 mm
Closing depth of front door window
Closing depth of front door window
Closing depth of rear door window	Z2	Adjustment value	6.0 mm	+/-1 mm
Closing depth of front door window
Closing depth of front door window
Z2 measuring point gap	X	Gap dimension	5 mm
Applying markings
Measuring point gap	X	Gap dimension	100 mm
Door in opened position
Door opening	W	Adjustment value	8 mm
Door in open position
Door window with respect to rear side window	Illustration 4	Gap dimension	7 mm	+/-0.8 mm
Gap/offset between door window and side window
Door shaft molding with respect to rear side window rubber	Illustration 3	Gap dimension	3.5 mm	+0.7 mm	-0.5 N
Gap/offset between door window and side window
Fastening screw securing door arrester to body		Tightening torque	35 Nm (26 ftlb.)	+/-3.5 Nm (+/- 2.5 ftlb.)
Loosening door arrester on body side
Fastening nut securing door arrester to door		Tightening torque	9.7 Nm (7.5 ftlb.)
Removing door arrester
Fastening screw for exterior mirror		Tightening torque	23 Nm (17 ftlb.)
Loosening rear-view mirror
Fastening screw for front lock		Tightening torque	9.7 Nm (7.5 ftlb.)
Removing lock
Fastening screw for belt strap guide		Tightening torque	46 Nm (34 ftlb.)
Loosening side fastening screws
Fastening screw for roll-over bar, side		Tightening torque	46 Nm (34 ftlb.)
Loosening side fastening screws
Fastening screw for roll-over bar, front		Tightening torque	46 Nm (34 ftlb.)
Loosening front fastening screws
Fastening screw for roll-over bar, rear		Tightening torque	46 Nm (34 ftlb.)
Loosening rear fastening screws
Fastening screws for tension bow		Tightening torque	9 Nm (6.5 ftlb.)	+/-1 Nm (+/- 0.5 ftlb.)
Loosening tension bow
Fastening screw for cover strip	Item 3	Tightening torque	6.0 Nm (4.5 ftlb.)
Loosening cover strip
Fastening screw for cover strip	Item 4	Tightening torque	3.5 Nm (2.5 ftlb.)
Loosening cover strip
Fastening screw for tension rope	Item 3	Tightening torque	2.8 Nm (2 ftlb.)
Loosening tension rope
Fastening screw for retaining strap (lower B-pillar)	Item 1	Tightening torque	1.8 Nm (1.5 ftlb.)
Screwing off retaining strap at the sides
Fastening screw for retaining strap (upper B-pillar)	Item 3	Tightening torque	3.5 Nm (2.5 ftlb.)
Screwing off retaining strap at the sides
Fastening screw for retaining strip on roof frame	Item 3	Tightening torque	6 Nm (4.5 ftlb.)
Loosening retaining strip
Fastening screw for tensioning straps	Item 4	Tightening torque	9 Nm (6.5 ftlb.)
Loosening tensioning straps
Fastening screw for holder	Item 2	Tightening torque	6 Nm (4.5 ftlb.)
Removing holder
Retaining strip to convertible top frame		Tightening torque	9.7 Nm (7.5 ftlb.)

Removing seal
Retaining strip to convertible top frame		Tightening torque	6 Nm (4.5 ftlb.)
Retaining strip to convertible top frame
Fastening screw on belt retractor		Tightening torque	50 Nm (37 ftlb.)
Removing seat-belt pretensioner
Fastening screw securing seat-belt mount to door sill		Tightening torque	50 Nm (37 ftlb.)
Fastening screw securing seat-belt buckle to seat frame	Item 1	Tightening torque	35 Nm (26 ftlb.)
Removing front seat-belt buckle
Fastening nut on supporting plate and headlight mounting		Tightening torque	9.7 Nm (7.5 ftlb.)
Fastening screw securing retaining bracket to body		Tightening torque	9.7 Nm (7.5 ftlb.)
Removing retaining bracket
Fastening screw securing supporting plate to body		Tightening torque	9.7 Nm (7.5 ftlb.)
Fastening nut securing supporting plate to headlight mounting		Tightening torque	9.7 Nm (7.5 ftlb.)
Removing supporting plate
Fastening screw for rear side window	Item 1	Tightening torque	4 Nm (3 ftlb.)	+/-0.5 Nm (+/- 0.5 ftlb.)
Removing side window
Fastening screw for rear side window, top	Item 2	Tightening torque	2.5 Nm (1.5 ftlb.)	+/-0.5 Nm (+/- 0.5 ftlb.)
Removing side window