Punch And Bottom Die Pairs
| Punch rivet | Pressing punch rivet joints out of two-layered panel joints with restricted access | D3 + D5 |
| Pressing punch rivet joints out of three-layered panel joints with restricted access | D4 + D5 | |
| Pressing punch rivet joints out of two-layered panel joints | S4+ D5 | |
| Pressing punch rivet joints out of three-layered panel joints | S5 + D5 |
- The correct punch and bottom die pair for the punch rivet joint is specified in the table above.
- Press out punch rivet using a hydraulic riveting tool > VAS 6790 - Compact Booster, refer to: TOOLS .
.
Pressing out punch rivet