LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 51 - Body Center, Roof, Frame - BOXSTER & CAYMAN >> WM 516819 Removing And Installing Dashboard Bracket (Except BOXSTER GTS) >> Replacing Holder For Dashboard Bracket

Replacing Holder For Dashboard Bracket

  1. Remove holder for dashboard bracket.
    G10029240Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 1.1. Unscrew fastening screws -1-  for the holder for the dashboard bracket.

      To keep the fastening screws straight, loosen the fastening screws gradually in alternating sequence.

    2. 1.2. Remove holder for dashboard bracket with the fastening screws.

      The fastening screws -1-  remain in the holder for the dashboard bracket.

  2. Install holder for dashboard bracket.
    G10029241Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. Place holder for dashboard bracket in installation position.
    2. 2.2. Fit and screw in fastening screws -1-  and tighten to Tightening torque 23 Nm (17 ftlb.)  until secure.

      Make sure that the fastening screws are straight.

scientia non olet · About LEMON Manuals