Preparing Connection Areas Of Body For Installing Body Front Section

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
• Bonding can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
• Do not begin bonding work until all materials and tools necessary for later repair work are available.

1. Align the sealing surface and connections with the body.
2. De-burr connection points and prepare them for welding.
3. Prepare marked areas for welding and bonding > Preparing connection areas.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Preparing connection areas

4. Prepare connection areas on the cowl panel > Preparing connection areas on cowl panel.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Preparing connection areas on cowl panel