Installing Front Wheel Housing

Information

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
• Do not begin bonding work until all materials and tools necessary for later repair work are available. 

1. Apply adhesive. > Application depth 3.0 mm 

   Working with body structural adhesive

   WM, 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00 ..

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive

2. Rivet in front wheel housing
   1. 2.1 Rivet in front wheel housing in area -1-  > BLIND RIVET 999.190.227.01 
   2. 2.2 Rivet in front wheel housing in area -2-  > BLIND RIVET 999.190.230.01 

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Removing front wheel housing

3. Rivet in front wheel housing. > BLIND RIVET 999.190.227.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing front wheel housing

4. Rivet in front wheel housing. > BLIND RIVET 999.190.227.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing front wheel housing