LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman GTS, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 50 - Body Front- BOXSTER & CAYMAN >> WM, 507255 Replacing Longitudinal Member For Wheel Housing Upper Section >> Tools And Materials >> Preparing Longitudinal Member For Wheel Housing

Preparing Longitudinal Member For Wheel Housing

  1. Fit outer upper longitudinal member.

    Check gap dimensions.

    WM, 5X00IN41 GAP DIMENSIONS .

    1. 1.1 Drill holes for rivets through the existing holes using a drill bit with a diameter of > Diameter 6.6 mm 
      G14269008Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Outer upper longitudinal member

  2. Fit upper longitudinal member.

    Check gap dimensions.

    WM, 5X00IN41 GAP DIMENSIONS .

    1. 2.1 Drill holes for rivets through the existing holes using a drill bit with a diameter of > Diameter 6.6 mm 
      G14269009Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Upper longitudinal member

scientia non olet · About LEMON Manuals