Preparing Connection Areas Of Body For Installing Spring Strut Mount

Fit in spring strut mount and secure it to the body. Check gap dimensions.

Position spring strut mount using the straightening system.

1.2 Offset bore -1- so that it is moved outward slightly → A- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Drilling holes

1.3 Drill two holes → B- on the supports between the spring strut mount and longitudinal member.

Offset the bores for the drilled-out rivets -1 and 2- so that they are moved up slightly.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Offsetting bores

Remove spring strut mount.
Prepare connection areas on the body for bonding.
WM, 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00 ..