Installing Rain Sensor

Information 

Limited Rain Sensor Function If The Following Points Are Not Observed: 

• There must be no air trapped between the windscreen and silicone layer on the rain sensor  .
• The temperature of the windscreen and rain sensor must be approx. 20 °C during assembly. Carefully heat the windscreen and rain sensor using a hot-air gun if necessary  .
• The contact surfaces must be free of grease and dirt  .
• Do not touch silicone layer on the rain sensor  .
• Do not remove the protection cap from a new rain sensor until immediately before pressing the rain sensor onto the windscreen  .

1. Position the rain sensor -1-  and insert it into the adhesive plate -2-  (-arrow-  ).
   Fig 1: Inserting Rain Sensor

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Plug in electric plug connection for the rain sensor -arrow-  until the connector engages securely in the rain sensor.
   Fig 2: Plugging Connection For Rain Sensor

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.