Preliminary Work
Information
The lumbar support and air cushions must be deflated before removing the front seat.
- First loosen cover for front middle backrest, then fold it down . → REMOVING COVER FOR FRONT MIDDLE BACKREST .
- Loosen cover for backrest. → REMOVING COVER FOR FRONT BACKREST
.
- 2.1. Slide cover for backrest -1- off the backrest shell -2- at the bottom left and right, starting at the middle (-direction of arrow- ) and disengage it.
- 2.2. Loosen front cover piping -1-
at the sides and carefully press it out of the backrest frame -2-
using a plastic wedge -3-
.
Information
If the air cushion for backrest is to be replaced on the side airbag side, the side airbag must be removed. → REMOVING FRONT SIDE AIRBAG .