Preparing Roof Aperture For Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove adhesive from the body.
Information
- The surface coating of adhesive residue helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution.
1. 1.1. Remove adhesive residue from the body using the cutting tool and flashing knife until a surface coating of adhesive remains.
  
  Fig 1: Removing Adhesive Residue
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Information
  - A drying time of at least 10 minutes must be observed between cleaning the bonding surface and applying primer! Always ensure that no cleaning solution residues remain on the body.
Eliminate paint damage.
1. 2.1. Clean new paint areas or damage to the top-coat paint on the body with cleaning solution and apply primer.
  
  Fig 2: Cleaning New Paint Areas
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.