Exterior Equipment
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws for rear-view mirror | Tightening torque | 23 Nm (17 ftlb.) | |||
|
Loosening rear-view mirror |
|||||
| Fastening screw for wheel housing liner and side trim | Tightening torque | 2 Nm (1.5 ftlb.) | +/-0.2 Nm (+/- 0.1 ftlb.) | ||
|
Removing side-section trim |
|||||
| Fastening screw securing rear spoiler to rear apron | Tightening torque | 3.2 Nm (2 ftlb.) | +/-20 % | ||
| Fastening screws securing support plate to body | Item 1 | Tightening torque | 23 Nm (17 ftlb.) | ||
|
Fastening screws for support plate |
|||||