Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for rear wheel housing liner | Item 1 | Tightening torque | 2 Nm (1.5 ftlb.) | +10 % | -15 % |
|
Fastening screw for rear wheel housing liner |
|||||
| Fastening screw for front wheel housing liner | Item 1 | Tightening torque | 3.2 Nm (2 ftlb.) | +10 % | -15 % |
|
Front door entry guard |
|||||
| Fastening screw for underside, rear | Tightening torque | 3.2 Nm (2 ftlb.) | +10 % | -15 % | |
|
Rear fastening screw |
|||||