LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (34 Mechanical Transmission Actuator Housing -- 911 CARRERA (991)) >> WM 340819 Removing And Installing Gearshift Bracket (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo, Turbo S, CARRERA 4 "Edition", Turbo CABRIO, Turbo S CABRIO, CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Removal >> Removing Gearshift Bracket

Removing Gearshift Bracket

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect shift and selector cables from the gearshift bracket.
    1. 1.1. Release bayonet locks -1-  (-arrows-  ) and unclip shift and selector cables -2-  .
      Fig 1: Turning Bayonet Lock For Shift And Selector Cables
      G09992269Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws on the gearshift bracket -1-  and remove gearshift bracket -2-  .
    Fig 2: Identifying Gearshift Bracket
    G09992270Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals