LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (40 Front Wheel Suspension, Drive Shafts -- 911 CARRERA (991)) >> WM 404119 Removing And Installing Front Drive Shaft (Except CARRERA, CARRERA S, 50-JAHRE 911, CARRERA GTS, CARRERA "Edition", CARR. CABRIO, CARR. S CABRIO, CARR. CABRIO, CARRERA Cabriolet "Edition"", CARRERA 4 "Edition, CARRERA 4 Cabriolet "Edition" >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install underbody covers.

    → 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY .

    → 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY .

    → Installing Cover For Centre Underbody .

  2. On vehicles with central bolts, check the lockable wheel bolt (locking mechanism) and wheel bolt for damage. Then, insert the lockable wheel bolt -1- into the wheel hub -2-. 
    Fig 1: Inserting Lockable Wheel Bolt Into Wheel Hub
    G09992817Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Install the relevant front wheel.

    → Installing Wheel .

    → Installing Wheel With Central Bolt .

scientia non olet · About LEMON Manuals