Installing alarm siren: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Installing alarm horn.

Position alarm horn -1- . Insert fastening screw -4- , counter (if necessary) and tighten the fastening nut -3- . → Tightening torque: 10 Nm (7.5 ftlb.)

Fig 1: Installing Alarm Horn And Connector
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Push on connector -2- until it engages securely.