LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (42 - Rear Wheel Suspension, Drive Shafts -- CARRERA (997)) >> WM 427119 Removing And Installing Rear Spring Strut (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Removing And Installing Spring Strut - Preliminary Work

Removing And Installing Spring Strut - Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle → 400000 LIFTING THE VEHICLE and remove rear wheel → REMOVING WHEEL .
  2. On the Coupe, remove cover over spring-strut supporting mount (after-sales service no.: 705319 rear cover).
  3. On the Cabriolet, move convertible top to service position and remove trim panel for convertible top rest (access to spring-strut mount) → REMOVING TRIM PANEL FOR HOOD COMPARTMENT .
scientia non olet · About LEMON Manuals