Tightening Torques For Wheel Carrier
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake cover plate to wheel carrier, M6 | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Brake disc to wheel hub, M6 | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Brake calliper to wheel carrier, M12 x 1.5 | Replace bolts on front and rear axle each time they are removed. | Tightening torque | 85 Nm (63 ftlb.) | ||
| Speed sensor to wheel carrier, M6 | Tightening torque | 10 Nm (7.5. ftlb.) | |||
| Combination coupling to wheel carrier, M6 | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Brake hose bracket to wheel carrier, M6 | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Cable holder to wheel carrier, M10 (911 GT3) | Tightening torque | 46 Nm (34 ftlb.) | |||
| Retainer plate for wheel bearing to wheel carrier, M8 | Tightening torque | 37 Nm (27 ftlb.) | |||
| Wheel hub to wheel carrier (tension bolt), M22 x 1.5 | Rear-wheel drive | Tightening torque | 460 Nm (340 ftlb.) | ||
| Drive shaft to wheel hub, M22 x 1.5 | All-wheel drive | Tightening torque | 460 Nm (340 ftlb.) | ||
| Drive shaft to front-wheel drive halfshaft flange, M8 | All-wheel drive | Tightening torque | 39 Nm (29 ftlb.) |