Erasing Programmed Signals On The Home Link
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Information
This operation erases the standard codes set in the factory. Do not repeat this operation if additional buttons are to be programmed.
Hold the two outer buttons -1 and 3- down for around 20 seconds until the LED -A- starts to flash quickly. All programmed signals for the buttons -1 to 3- are erased.
Do this before selling the vehicle, for example.