LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (96 - Lights, Lamps, Switches, Interior -- 987-BOXSTER-CAYMAN) >> WM 964419 Removing And Installing Glove Compartment Light (All Models) >> Removing Glove Compartment Light

Removing Glove Compartment Light

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Incorrect handling of bulbs
  • Risk of damage to bulbs and the bulb housing

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

- Glove compartment light

Fig 1: Overview Of Glove Compartment Light On 911
G09593646Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Press glove compartment light carefully out of the glove compartment at the cut-out -arrow-  using a screwdriver.
  2. Release connector on glove compartment light -arrows a-  and pull it off.
  3. Remove glove compartment light.
  4. Fig 2: Removing Glove Compartment Light
    G09593647Courtesy of PORSCHE CARS NORTH AMERICA, INC.