LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (66 - Exterior Equipment -- 911 CARRERA (991)) >> WM 663719 Removing And Installing Outer Rear Window Molding (TARGA 4, TARGA 4S, TARGA 4 GTS) >> Installing Outer Rear Window Molding

Installing Outer Rear Window Molding

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
scientia non olet · About LEMON Manuals