Removing Engine Mounting

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Danger of objects or loads falling down

Risk of squashing or crushing

→ Secure components to prevent them from falling down.

Support engine in installation position using floor jack H 2 SL WE 1032 and transmission jack plate of transmission jack V.A.G 1383 A WE 1082 at the oil pan.
Loosen and unscrew M12 hexagon nut -1- on the engine mounting.

Fig 1: Identifying Engine Carrier Mounting
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew two Torx screws (M8 x 35; M8 x 65 for active engine mountings) -2- on the engine mounting -1- .
For active engine mountings: Release and pull off cable plug -3- .

Fig 2: Identifying Left Engine Mounting
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Guide engine mounting -1- up out of the engine carrier.

Fig 3: Identifying Vehicle Engine Mounting
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check engine mounting carefully for signs of damage (dents, cracks on metal body, threaded bolts) or leaks (emerging hydraulic fluid).
1. 6.1. Replace component if necessary.