Removing switch console

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

The switch console is clipped into the centre console.

Fig 1: Locating Switch Console

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Press in the side retaining bars on the switch console at the left and right using a screwdriver -1- and pull switch console out of its installation slot.

Fig 2: Removing Switch Console
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Release electric connectors and pull them off the switch console. The number of connectors can vary, depending on equipment.

Fig 3: Pulling Off Connector
Courtesy of PORSCHE CARS NORTH AMERICA, INC.