Removing Glove Compartment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Glove Compartment Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrew right fastening screws -2- from the glove compartment -1- .

Fig 2: Releasing Glove Compartment (Right)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull electrical lead out of glove compartment -arrow- .
Unscrew left fastening screws -2- from the glove compartment -1- .

Fig 3: Releasing Glove Compartment (Left)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew top fastening screws -2- from the glove compartment -1- .

Fig 4: Releasing Glove Compartment (Top)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Carefully pull out glove compartment -1- (-arrow- ) until the electrical plug connection can be removed.
Pull off electrical plug connection -2- (-arrow- ) and remove glove compartment -1- to the rear.

Fig 5: Disconnecting Plug Connection
Courtesy of PORSCHE CARS NORTH AMERICA, INC.