Technical Values
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Carrier side section to body (front and rear), M10 x 1.5 x 80 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Cross member to carrier side section (top and bottom), M10 x 1.5 x 45 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Transmission bracket to Tiptronic transmission, M10 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Transmission bracket to manual transmission, M10 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Hydraulic mount to rear-axle carrier side section, M8 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 33 Nm (24 ftlb.) | ||
| Support plate to cross member, M10 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Support plate to V-brace (rear transverse strut) collar nut M10 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Diagonal brace with support plate to carrier side section (collar nut), M10 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Diagonal brace to body, M10 x 1.5 (changed to M12 x 1.5 in current model year 2008) | Please note: This was changed to M12 x 1.5 in the current model year 2008! Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | M10=65 Nm (48 ftlb.) | ||
| Diagonal brace to body, M12 x 1.5 (M12 x 1.5 used instead of M10 x 1.5 in current model year 2008) | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | M12=110 Nm (81.5 ftlb.) | ||
| Control arm (lower control arm) to carrier side section (camber eccentric), M12 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 100 Nm (74 ftlb.) | ||
| Control arm 2 (toe control arm) to cross member (toe eccentric), M12 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 100 Nm (74 ftlb.) |