Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Wheel bearing with housing to wheel carrier (GT4 only) | Cheese head bolt, M12 x 1.25 x 45/always use new bolts following removal | Initial tightening | 80 Nm (59 ftlb.) | ||
| Wheel bearing with housing to wheel carrier (GT4 only) | Cheese head bolt, M12 x 1.25 x 45/always use new bolts following removal | Final tightening | +120° | ||
| Retainer plate for parking brake shoes to wheel carrier (GT4 only) | Screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ftlb.) |